Chain hydraulic portable Brinell hardness tester 10/3000 kg

€ 4,336.00 *Prices are exclusive of VAT

Article code: PHB-3000a

Install the testing head into the chain adaptor, when testing, using the chain to fix the tester on the surface of the work piece. And then handle the pressure lever to apply test force. The testing head is a small hydraulic system in which a release valve is used to control the test force. When the test force rises 3000kgf, the release valve will open and pressure will fall down, and it needs to apply the test force repeatedly 3-4 times to make the needle of the pressure gage point to 3000kgf for 3-4 times. Thus it is equivalent to the test condition of Brinell hardness testing method to hold 3000kgf test force with 10mm ball for 10-15 seconds, in accordance with EN ISO & ASTM standards.

Feature

on-site testing: it is a portable instrument suitable to use in the plant. It is easy to operate and convenient to carry. So it can be used to easy test large work-pieces in any direction on site.
permanent indentation: with 3000kg test force and 10mm ball indenter, the indentation can accurately reflect the true harness of cast iron, cast steel, forge piece, and other materials with coarse grain. The permanent indentation can be re inspected at any time after testing.
real result: PHB-3000 has the same principle as the bench type Brinell hardness tester. So the result is totally different from the lossy conversion value of other portable hardness testers (eg. Rebound type hardness tester).
wide testing range: PHB-3000 has various test forces and two different ball indenters in order to test .

Technical specification

test force: 3000kg (500 kg, 750 kg, 1000 kg, and 1500 kg optional)
indenter: Ø 10 mm carbide ball indenter (Ø 5mm optional)
testing range: 100~650 HBW (expendable to 28-650HBW)
test diameter: ≤ 500mm
test force error: ≤ 1% and complies with ISO 6506, and ASTM E10
accuracy: complies with ISO 6506 and ASTM E10
repeatability: complies with ISO 6506 and ASTM E10
net weight: 14.5 kg

Standard delivery

tester
pressure lever
hardness block HBW 10/3000
Ø10 mm carbide ball indenter
20X Measuring Microscope
hexagon wrench
chain adaptor
1.3 m chain
Brinell hardness table

NB: the chain support does not allow direct control or calibration with a hardness standard block. The manufacturer strongly advises for this reason to buy a standard support like the PHB-3000/std350 to carry out this control.

Quantity