Thermoydrometerwith datalogger KLIMA 20

€ 286.00 *Prices are exclusive of VAT

Article code: 30009640

Quantity

The KLIMA 30 data logger is a mobile storage unit for recording air temperature and air humidity data and is specifically designed to be used for long-term monitoring.
The measured values are saved in user-defined time intervals (between 5 sec and 6 h) along with the date and time. They are stored in the internal memory of the device.
Additionally, an external temperature probe can also be connected to the Klima 30, so material or core temperature measurements can be carried out.
The programming and reading out of the data logger is done via the user-friendly software DIALOG D+ (only delivered as standard in the version Basis-Set). Among other things, the stored values can be displayed and printed as a table or as graphic.
The data logger is ideally suited for tracking the climate in residential or working rooms, museums, or warehouses.
The logger is not designed for outdoor use or constantly high air humidity.

Technical specification

air humidity: 0 to 100 % R.H.
accuracy: ± 1,8 % R.H. (10 to 90 % R.H.)
temperature: -30 to +70°C
accuracy: ± 0,3°C (+10 to +40°C)
material temperature: -50 to +125°C
accuracy: ±0,5°C (0 to +40°C)
memory capacity: 50,000 sets of measurement data (t°, %HR, date, time)
measurement time interval: user-defined between 5 sec and 6h
LCD display with double indication of the temperature, the humidity and/or the dew point
* first indication: actual value with possibility to select temperature (°C, °F), relative humidity or dew point temperature.
* second indication:
if no external temperature sensor is connected, possibility to select temperature (°C, °F), relative humidity or dew point temperature and with mode button, possibility to display the max, min or average value or auto mode (switch automatically between each mode every 2 sec).
if external temperature sensor is connected, temperature is shown
min, max threshold function: is programmed via PC software, an exceeding or undershooting is signaled by an red LED on the data logger
start/stop button for data logging with green LED flashing on the data logger when active
USB port for programmation and data transfer
connection for external temperature sensor
power supply: CR2032 – 3 Volt
battery current state indicator
working temperature: -30~+60°C
storage temperature: -30~+70°C
sizes (lxwxh): 92x55x21 mm
weight: 95 g

Standard delivery

Option & accessories

wall bracket used to carry out the measurements at a representative point in the room. By attaching the KLIMA 30 to a wall bracket it can be ensured that the data logger is always exposed to the same conditions, such as to the same air flow. The wall bracket is magnetic on the back and can be screwed in or attached by a double sided tape (3900)
external temperature probe with cable l = 3m, -50~+120°C, accuracy ± 0,5°C (0~40°C) other ± 1°C (3901)
external temperature probe with cable l = 8m, -50~+120°C, accuracy ± 0,5°C (0~40°C) other ± 1°C (3902)

	Quantity	Article	Starting price	After that	Period	Total
	Quantity	Article	Unit price	Total
		Quantity:	(Gift)