Hardnesstester UCI HO with probe HV5

Free Shipping B,L,F,NL,D

€ 5,520.00 € 4,684.00 *Prices are exclusive of VAT

Manufacturer: SAUTER GmbH
Article code: HO 5K

application: this ultrasound hardness testing device is ideally suited for mobile hardness testing, where the main emphasis is on obtaining rapid and precise results
principle: the HO measures using a Vickers diamond tip, which is pressed into the test piece with a defined force. After that the tip is moved into high-frequency ultrasound vibrations. The hardness is derived from the attenuation
examples: the HO ultrasound hardness testing system is primarily used for measuring small forgings, castings, welding points, punched parts, casting tools, ball bearings and the flanks of gear wheels as well as for measuring the influence of warmth or heat
advantages compared with Rockwell and Brinell: Less test force and therefore only microscopic, small penetrations means that the testing is less destructive
advantages compared with Vickers: demanding optical measuring is not required. You can therefore carry out measurements directly on-site, for example, on a permanently installed workpiece
advantages compared with Leeb: the high requirements for the weight of the test object are no longer required, in most cases
standards: The device fulfils these technical standards: DIN 50159-1-2008; ASTMA1038-2005; JB/T9377-2013
mini statistics function: display of the measuring result, the number of measurements, the maximum and minimum value as well as the average value
measurement data memory saves up to 1000 measurement groups each with 20 individual values
calibration: the device can be adjusted to standard hardness comparison plates as well as to individual reference standards

Technical data

according to standards DIN 50159-1-2008; ASTMA1038-2005; JB / T9377-2013
test load: 5 kg
penetrator: Vickers diamond
measuring range: HRC: 20.3 ~ 68
HRB: 41 ~ 100
HRA: 61 ~ 85.6
HV: 80 ~ 1599
HB: 76 ~ 618
tensile strength: 255-2180 N / mm²
accuracy: ± 3% HV; ± 1.5 HR; ± 3% HB
measuring time: adjustable from 1 to 5 s.
display units: HRC, HV, HBS, HBW, HK, HRA, HRD, HR15N, HR30N, HR45N, HS, HRF, HR15T, HR30T, HR45T, HRB
display: measurement in HV, measurement in 2 other units, number of measure, average, max, min
minimum weight of parts: 300 g, with support ring (accessory) 100 g
minimum thickness of the workpiece: 10x depth of impression (150~250 µm), recommended > 1 mm
Ra roughness max: 30% of the penetration depth, ＜10um
minimum dimensions of the test area: approx. 5 × 5mm (recommended)
large 3.2 "LCD color display with backlight
data memory: max 1000 groups of max 20 measurements per group
calibration memory: max 20
data export: USB interface to send data to PC or printer
operation with internal battery 4.2 V, 4800 mAh, in series, operating time up to 12 h without backlighting, charging time approx. 8 am
charge via USB with charger 110 ~ 240V / 50 ~ 60Hz - 5Vdc / 1A
auto sleep mode after 30 min
total dimensions:
* housing L × W × H: 160 × 83 × 28 mm
* probe: Ø22 mm x 154 mm
operating temperature: -10 ~ + 40 ° C
storage temperature: -20 ~ + 60 ° C
relative humidity: <85% without condensation
net weight approx .: 0.7 kg case, 0.3 kg probe

Click here to download the brochure in Pdf format

Quantity

Standard delivery

display unit HO
HV5 probe
probe cable
hardness block, "standard"
USB power adapter
accumulator
software for transferring the recorded data to the PC
screwdriver
transport case
manual

Accessories

external impact sensor LEEB type D, AHMO D
sensor HV 1, HV 2, HV 10
support ring, flat, HO-A04
support ring, small cylinder, HO-A05
support ring, large cylinder, HO-A06
support ring for deep hole, protective cover, HO -A07
calibration and adjustment block (hardness reference plate) with steel hardnesses defined and tested for regular checking and adjustment of durometers. The hardness values are indicated. The plates are distinguished by a fine and homogeneous granular machining of steel, Ø 90 mm, including certificate of calibration:
* 28 to 35 HRC: HO-A09
* 38 to 43 HRC: HO-A10
* 48 to 53 HRC: HO-A11
* 58 to 63 HRC: HO-A12
test bench for reproducible test movements. This makes it possible to exclude any error such as during a manual use of the probe. This results in even more stable and accurate measurements. Flexible mechanics, stroke length 34 mm, maximum height of the object under test in the test stand 240 mm, swiveling test head for measurements outside the base plate, very robust design, net weight approx. 9 kg, HO-A08
motorized probes HV 0.3, HV 0.5, HV 0.8, HV 1 and support, see HO-M

Option & accessories

	Quantity	Article	Starting price	After that	Period	Total
	Quantity	Article	Unit price	Total
		Quantity:	(Gift)

	Subtotal



	Total
*Prices include VAT		*Prices are exclusive of VAT
Total weight

Article group

Login

Newsletter

Information

Hardnesstester UCI HO with probe HV5

Free Shipping B,L,F,NL,D

Option & accessories

UCI-sonde HV1 for HO

Support ring, small cylinder, for HO

Support ring, large cylinder, for HO

Support ring for deep hole for HO

Test bench for probes of HO

UCI-sonde HV2 for HO

UCI-sonde HV10 for HO

Factory calibration certificate for hardnesstester UCI HO xK