Portable hardness tester with impact PHB-1

€ 684.00 *Prices are exclusive of VAT

Article code: PHB-1

PHB-1 Pin impact hardness tester is designed by Brinell hardness testing method. The test force is controlled by a calibrated shear pin. After reading the diameter of the impression with the reading microscope, the Brinell hardness value can be obtained from the lookup table.
This type of Brinell hammer impact hardness tester is capable of testing small to very large sample sizes. It is particularly suitable for assemblies which are not practical to take to the laboratory and which should not be cut. The test can be carried out in any direction to test the hardness of the top, bottom and side of the specimen.
PHB-1 Pin impact hardness tester can be widely used to test the hardness of forgings, castings, steels, non-ferrous metal and its alloys, and to test the hardness of annealed, normalized and mechanical parts. soaked.
Compared with rebound type hardness tester, Brinell hammer impact tester has many advantages such as higher accuracy, less factors affecting accuracy and less requirement on surface roughness. The test result meets the requirements of most designs without conversion and is more widely accepted in international trade.

Technical specifications

test force 1580 kgf
indenter:
* 7.26mm steel ball indenter, test range 100 ~ 350 HBW
* 4mm carbide ball indenter, test range 350 ~ 650 HBW
measurement error: = 5% conforming to ISO, ASTM
repeatability error: = 5% conforming to ISO, ASTM
net weight: 0.8 kg

Scope of supply

NB: not delivered impact hammer 3 lb (1.4 kg)

Quantity

	Quantity	Article	Starting price	After that	Period	Total
	Quantity	Article	Unit price	Total
		Quantity:	(Gift)